Skip to main content
Log in
Schneider Electric ILE2T661PB1A5

Schneider ILE2T661PB1A5 Lexium integrated drive/motor, 3.8 N.m, 186 rpm

MPNILE2T661PB1A5
Obsolete

Schneider Electric Lexium ILE2T661PB1A5 integrated drive/motor, brushless DC, 6 poles, 3.8 N.m torque at 24 V and 48 V, 186 rpm max, 45 W at 24 V / 66 W at 48 V, Modbus TCP, worm gear 24:1, IP41 shaft bushing / IP54 total, CE marked.

$2,740.00Ref. price · indicative, final on quote
Schneider Electric ILE2T661PB1A5 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILE2T661PB1A5 key specifications
ParameterValue
Motor typeBrushless DC motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeBLDC encoder
Gear box typeWorm gear, 2 stages
Protection typeSafe torque off Short circuit of the output voltage Overload of output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55.2 V
Discrete output voltage23...25 V

All specifications

ILE2T661PB1A5 additional specifications
ParameterValue
Supply voltage24 V 48 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption7000 mA peak 5500 mA maximum continuous
Discrete input current10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface
Maximum supply current0.1 A power stage disabled) 6.8 A 24 V 3.8 A 48 V
Maximum switching current100 mA per output 200 mA total
Nominal output power45 W 24 V 66 W 48 V
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5
Commissioning interfaceRS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Communication interfaceModbus TCP, Integrated
Mounting supportFlange
Mounting holes diameter0.2 in (4.4 mm)
Number of mounting holes2
Electrical connectionPrinted circuit board connector
Shock resistance150 m/s² 1000 shocks IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles IEC 60068-2-6
StandardsIEC 61800-3 IEC 50347 IEC 60072-1 EN 61800-3:2001, second environment EN 61800-3 : 2001-02 IEC 50178 IEC 61800-3, Ed 2
Length9.02 in (229 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endHole
Second shaftWithout second shaft end
Detent torque25.7 lbf.in (2.9 N.m)
Holding brakeWithout
Nominal speed168 rpm 24 V 168 rpm 48 V
Rotor inertia90 kg.cm²
Accuracy error+/- 1 point
Nominal torque33.6 lbf.in (3.8 N.m) 24 V 33.6 lbf.in (3.8 N.m) 48 V
Reduction ratio24:1 (525:22)
Device short nameILE
Motor flange size2.6 in (66 mm)
Peak stall torque54.79 lbf.in (6.19 N.m) 24 V 54.79 lbf.in (6.19 N.m) 48 V
Transmission rate10, 100 Mbits
Service life in hours3000 h bearing
Associated fuse rating16 A
Maximum axial force fa80 N
Number of motor stacks1
Continuous stall torque37.2 lbf.in (4.2 N.m)
Maximum radial force fr200 N
Centring collar diameter1.4 in (36 mm)
Maximum mechanical speed186 rpm
Speed feedback resolution12 points/turn motor 1.26° gearbox output
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILE2T661PB1A5 is a Schneider Lexium integrated drive/motor combining a 6-pole brushless DC motor with a 24:1 worm gear in a single 66 mm frame, delivering 3.8 N.m of torque at both 24 V and 48 V supplies and a maximum speed of 186 rpm. It carries Modbus TCP on an integrated RS485 interface at 9.6, 19.2, or 38.4 kbaud, with safe torque off and short-circuit protection on the output voltage, and is rated for 150 m/s² shock per IEC 60068-2-29.

Compared to the ILE2T661PB1A2, the ILE2T661PB1A5 delivers lower torque (3.8 N.m vs 7.3 N.m) and lower power (45 W at 24 V / 66 W at 48 V vs 95 W at 24 V / 119 W at 48 V), but achieves a higher maximum speed (186 rpm vs 133 rpm) and a finer gearbox output resolution (1.26° vs 0.8° per motor step).

MPN
ILE2T661PB1A5