Skip to main content
Log in
Schneider Electric ILE2T661PC1A1

Schneider ILE2T661PC1A1 Lexium integrated drive, 3.5 N.m, 281 rpm

MPNILE2T661PC1A1
Obsolete

Schneider ILE2T661PC1A1 — now discontinued, supplied from remaining surplus and broker stock.

$2,740.00Ref. price · indicative, final on quote
Schneider Electric ILE2T661PC1A1 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILE2T661PC1A1 key specifications
ParameterValue
Motor typeBrushless DC motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeBLDC encoder
Gear box typeStraight teeth gear, 3 stages
Protection typeSafe torque off Short circuit of the output voltage Overload of output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55.2 V
Discrete output voltage23...25 V

All specifications

ILE2T661PC1A1 additional specifications
ParameterValue
Supply voltage24 V 48 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption7000 mA peak 5500 mA maximum continuous
Discrete input current10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface
Maximum supply current0.1 A power stage disabled) 6.8 A 24 V 3.8 A 48 V
Maximum switching current100 mA per output 200 mA total
Nominal output power119 W 48 V 95 W 24 V
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5
Commissioning interfaceRS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Communication interfaceModbus TCP, Integrated
Mounting supportFlange
Mounting holes diameter0.2 in (4.4 mm)
Number of mounting holes4
Circle diameter of the mounting holes2.90 in (73.54 mm)
Electrical connectionIndustrial connector
Shock resistance150 m/s² 1000 shocks IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles IEC 60068-2-6
Key width0.6 in (16 mm)
Centring collar depth0.2 in (4 mm)
StandardsIEC 50347 EN 61800-3:2001, second environment IEC 50178 IEC 61800-3 EN 61800-3 : 2001-02 IEC 60072-1 IEC 61800-3, Ed 2
Length6.9 in (174 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endKeyed
Second shaftWithout second shaft end
Shaft length1.0 in (25 mm)
Detent torque12.57 lbf.in (1.42 N.m)
Holding brakeWithout
Nominal speed225 rpm 24 V 281 rpm 48 V
Rotor inertia48 kg.cm²
Accuracy error+/- 0.5 point
Nominal torque31.0 lbf.in (3.5 N.m) 24 V 31.0 lbf.in (3.5 N.m) 48 V
Shaft diameter0.4 in (10 mm)
Reduction ratio18:1 (160:9)
Device short nameILE
Motor flange size2.6 in (66 mm)
Peak stall torque54.79 lbf.in (6.19 N.m) 24 V 54.79 lbf.in (6.19 N.m) 48 V
Transmission rate10, 100 Mbits
Service life in hours2500 h bearing short-term operation 15000 h bearing long-term operation
Associated fuse rating16 A
Maximum axial force fa10 N long-term operation) 80 N short-term operation)
Number of motor stacks1
Continuous stall torque38.06 lbf.in (4.3 N.m)
Maximum radial force fr200 N long-term operation) 200 N short-term operation)
Centring collar diameter0.6 in (16 mm)
Maximum mechanical speed281 rpm
Speed feedback resolution1.667° gearbox output 12 points/turn motor
Maximum torsional backlash1 °
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILE2T661PC1A1 is a Schneider Lexium integrated drive combining a brushless DC motor, gearbox (18:1 ratio), and Modbus TCP interface in a single 66 mm frame. It delivers 3.5 N.m continuous torque at 281 rpm on a 24 V DC supply, with a 6-pole winding and keyed shaft. Rated for 150 m/s² shock per IEC 60068-2-29 and IP41 (shaft bushing conforms to IP54), it suits compact positioning axes where the drive electronics and motor share one enclosure.

Compared to the BRS368H131ACA, the ILE2T661PC1A1 trades speed for torque: 3.5 N.m at 281 rpm versus 1.5 N.m at 3000 rpm. The 24 V supply of the ILE2T661PC1A1 also differs from the 34 V of the BRS368H131ACA, so a direct swap without rewiring is not possible.

MPN
ILE2T661PC1A1