Skip to main content
Log in
Schneider Electric ILE2T661PC1A6

Schneider ILE2T661PC1A6 Lexium integrated drive, 6 N.m, 93 rpm

MPNILE2T661PC1A6
Obsolete

Schneider ILE2T661PC1A6 — now discontinued, supplied from remaining surplus and broker stock.

$3,055.00Ref. price · indicative, final on quote
Schneider Electric ILE2T661PC1A6 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILE2T661PC1A6 key specifications
ParameterValue
Motor typeBrushless DC motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeBLDC encoder
Gear box typeWorm gear, 3 stages
Protection typeOverload of output voltage Short circuit of the output voltage Safe torque off
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55.2 V
Discrete output voltage23...25 V

All specifications

ILE2T661PC1A6 additional specifications
ParameterValue
Supply voltage48 V 24 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption7000 mA peak 5500 mA maximum continuous
Discrete input current10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface
Maximum supply current0.1 A power stage disabled) 6.8 A 24 V 2.7 A 48 V
Maximum switching current100 mA per output 200 mA total
Nominal output power45 W 24 V 47 W 48 V
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5
Commissioning interfaceRS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Communication interfaceModbus TCP, Integrated
Mounting supportFlange
Mounting holes diameter0.2 in (4.4 mm)
Number of mounting holes2
Electrical connectionIndustrial connector
Shock resistance150 m/s² 1000 shocks IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles IEC 60068-2-6
StandardsIEC 61800-3, Ed 2 IEC 60072-1 EN 61800-3 : 2001-02 EN 61800-3:2001, second environment IEC 50178 IEC 61800-3 IEC 50347
Length9.02 in (229 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endHole
Second shaftWithout second shaft end
Detent torque57.5 lbf.in (6.5 N.m)
Holding brakeWithout
Nominal speed75 rpm 24 V 75 rpm 48 V
Rotor inertia430 kg.cm²
Accuracy error+/- 1 point
Nominal torque53.1 lbf.in (6 N.m) 24 V 53.1 lbf.in (6 N.m) 48 V
Reduction ratio54:1 (1715:32)
Device short nameILE
Motor flange size2.6 in (66 mm)
Peak stall torque123.29 lbf.in (13.93 N.m) 24 V 123.29 lbf.in (13.93 N.m) 48 V
Transmission rate10, 100 Mbits
Service life in hours6000 h bearing
Associated fuse rating16 A
Maximum axial force fa80 N
Number of motor stacks1
Continuous stall torque70.8 lbf.in (8 N.m)
Maximum radial force fr200 N
Centring collar diameter1.4 in (36 mm)
Maximum mechanical speed93 rpm
Speed feedback resolution12 points/turn motor 0.56° gearbox output
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILE2T661PC1A6 is a Schneider Lexium integrated drive combining a 6-pole brushless DC motor with a 3-stage worm gearbox at a 54:1 reduction, delivering 6 N.m of torque at 93 rpm on a 48 V DC supply. It communicates over Modbus TCP at 10/100 Mbit/s and carries an IP54 rating (total except shaft bushing), with safe torque off and output overload protection built in.

Compared to the BRS368H131ACA, the ILE2T661PC1A6 delivers 6 N.m of torque at 93 rpm — the worm gear trades speed for high torque.

MPN
ILE2T661PC1A6