The LC1E06004M7IN is a 4-pole (4NO) contactor from the Easy TeSys Control range, rated for resistive loads in AC-1 utilisation category at 20 A up to 415 V with a 220 V coil. It mounts on a plate or DIN rail, making it a straightforward fit into standard control panels for switching heaters, lighting, or other resistive circuits.
The AC-1 rating at 20 A is the key selection figure: it governs the contactor's ability to handle resistive loads without derating. The 4NO configuration gives four normally-open power poles, so it suits applications where all four circuits close together on energisation. The 220 V coil is standard for many industrial control voltages across Europe and Asia. The 1.5 ms non-overlap time between NC and NO contacts on both energisation and de-energisation is a detail worth noting if the contactor is used in a reversing or interlocking scheme — it ensures a guaranteed break-before-make gap.
Deployment Context
The TH protective treatment (pollution degree 3 per IEC 60068) means it can handle the conductive dust and humidity typical in industrial environments like cement plants or food-processing lines.