The Schneider Electric LC1E06004U7IN is a 4-pole (4NO) contactor from the Easy TeSys Control range, rated for resistive loads in AC-1 utilisation category at 20 A up to 415 V. It is designed for panel mounting on a DIN rail or plate, with an IP2X degree of protection per IEC 60529. The contactor complies with EN/IEC 60947-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, and the corresponding GB/T 14048 series standards, making it suitable for industrial control panels requiring certified switching of resistive loads.
The AC-1 rating of 20 A at ≤415 V defines the continuous resistive load the main poles can carry and switch. For motor or inductive loads, a derating to the appropriate AC-3 or AC-4 category would apply — this part is specified for resistive duty only. The contactor's non-overlap time of 1.5 ms on both energisation and de-energisation between NC and NO contacts ensures that make and break transitions do not short-circuit control logic — critical when interlocking safety circuits or reversing starters. Rated for operation at altitudes up to 3000 m and ambient temperatures from -5 °C to 55 °C (storage -60 °C to 80 °C), with protective treatment TH (pollution degree 3) per IEC 60068. The 850 °C fire resistance per IEC 60695-2-1 supports use in flame-retardant panel designs.
Because the LC1E06004U7IN is obsolete, a buyer specifying it for a new design should evaluate a current-production replacement. The Easy TeSys Control range includes active equivalents with similar pole configurations and AC-1 ratings; contact our sourcing desk with your load details for a cross-reference recommendation.
Depth of 80 mm should be checked against enclosure depth, especially when wiring with ferrule-ended conductors.