The Schneider Electric LC1E06008B7IN is a 4-pole contactor from the Easy TeSys Control range, configured 2NO+2NC, rated 20 A in AC-1 utilisation category at ≤415 V with a 24 V coil. AC-1 covers resistive loads — heaters, lighting banks, non-inductive circuits — so this contactor is not rated for motor starting or inductive switching. Mounts on plate or DIN rail (45 mm width, 74 mm height, 80 mm depth), with IP2X finger protection per IEC 60529. Rated for operation at altitudes up to 3000 m and ambient temperatures from -5 °C to +55 °C, with storage down to -60 °C. Compliant with EN/IEC 60947-1, 60947-4-1, 60947-5-1 and the corresponding GB/T standards, with fire resistance tested to 850 °C per IEC 60695-2-1. Mechanical robustness is specified for vibration (1.5 Gn open, 3 Gn closed) and shock (7 Gn open, 10 Gn closed) — figures that confirm it holds its state under typical industrial floor vibration.
What the AC-1 rating means for fit
The 20 A rating is valid only in AC-1 (resistive) duty. This contactor has no AC-3 or AC-4 motor-rating curve, so it cannot switch induction motors, solenoids, or transformer primaries without severe contact erosion.