The Schneider Electric LC1E06008F7IN is an Easy TeSys Control 4-pole contactor — 2 normally-open and 2 normally-closed power poles — rated for 32 A in AC-1 utilisation category at up to 415 V, with a 110 V AC coil. AC-1 means it is designed for resistive loads (heating, lighting, non-inductive banks), not motor starting; the 32 A figure is the continuous current it can make and break under those conditions. The 1.5 ms non-overlap time between NC and NO contacts on both energisation and de-energisation is a safety feature that prevents a momentary short across the poles during switching — relevant if you are using the NC pole for a holding circuit or interlock.
Mounting and Integration — DIN Rail or Plate
Mounts on either a plate or a standard DIN rail (35 mm), which gives flexibility in panel layout. The 45 mm width and 74 mm height fit a compact footprint — useful when retrofitting into an existing enclosure where space is tight. IP2X finger protection means the contactor's live parts are guarded against accidental contact with a finger, but it is not sealed against dust or moisture; keep it inside a panel with at least IP54 enclosure rating for anything beyond a clean environment.
Environmental and Mechanical Ruggedness
Rated for operation from -5 °C to 55 °C ambient, with storage from -60 °C to 80 °C. The TH protective treatment (pollution degree 3 per IEC 60068) means it handles conductive pollution in industrial atmospheres — think dust, humidity, or mild chemical exposure inside a panel. Mechanically, it withstands 3 Gn vibration when closed and 10 Gn shock for 11 ms — solid for use on a machine that sees vibration from a nearby press or conveyor drive. Fire resistance at 850 °C (IEC 60695-2-1) adds a layer of safety for panel fire-rating compliance.