The LC1E0601F7 is a 3-pole (3NO) contactor from the Easy TeSys Control range, rated 6 A in AC-3 utilisation category for switching motor loads up to 440 V. That AC-3 rating governs motor duty — it defines the contactor's ability to make and break a running motor's locked-rotor current. The coil is 110 V AC, 50/60 Hz, and the contactor carries a single NC auxiliary contact built in.
Mounts on a DIN rail or directly to a plate, 45 mm wide — a standard 1-module footprint that leaves room for a motor-protective circuit breaker or overload relay alongside in a 60 mm or 80 mm enclosure depth. The IP2X finger-safe front cover meets IEC 60529, so it's suitable for panels where operators may reach near live terminals. Operating altitude goes to 3000 m without derating, and the permissible ambient range is -5 °C to +55 °C running, with storage from -60 °C to +80 °C.
Certified to EN/IEC 60947-1, -4-1 (contactor/motor-starter), and -5-1 (control-circuit device), plus the corresponding GB/T Chinese standards. Fire resistance tested to 850 °C per IEC 60695-2-1, and protective treatment TH (pollution degree 3) per IEC 60068-2-30 means it handles humid, polluted environments without derating — typical for a panel in a non-climate-controlled factory hall.