The Schneider Electric LC1E0610Q7 is a 3-pole (3NO) contactor from the Easy TeSys Control range, rated 6 A in AC-3 utilisation category at ≤440 V — that is the motor-switching current, so it handles a 3 kW induction motor on a 400 V line. Rated for both motor control (AC-3, AC-3e) and resistive loads (AC-1), this contactor covers pump, fan, conveyor, and heater switching in control panels. The IP2X finger protection means the live terminals are shielded to the finger-probe standard — safe for open-panel work during commissioning.
The 45 mm width (one standard modular unit) and 80 mm depth leave room for side-by-side grouping with other Easy TeSys or TeSys D components — no special spacing needed for thermal derating at the rated current. Operating altitude goes to 3000 m without derating, so it works in high-altitude installations without a current knock-down. Ambient temperature range: -5 to 55 °C operation, -20 to 70 °C at coil rated voltage, storage from -60 to 80 °C.
The LC1E0610Q7 carries EN/IEC 60947-1, -4-1, and -5-1 compliance for industrial controlgear, plus GB/T 14048 equivalents for the Chinese market. It also meets EN/IEC 60335-1 Clause 30.2 and EN/IEC 60335-2-40 Annex JJ for glow-wire / fire resistance in household and HVAC appliances.
Switching timing and mechanical robustness
Mechanical robustness: vibrations at 1.5 Gn (contact open) and 3 Gn (closed), shocks at 7 Gn (open) and 10 Gn (closed) over 11 ms, so it holds up on mobile equipment or near heavy impact sources.