The Schneider LC1E0610R6 is a 3-pole contactor from the Easy TeSys Control range, rated for AC-3 and AC-3e motor duty at 6 A up to 440 V, with a 440 V AC 60 Hz coil and one normally-open auxiliary contact. It's built to EN/IEC 60947-4-1 for motor switching and EN/IEC 60947-5-1 for control circuit isolation, so it meets the standard panel-build requirements across Europe and markets that adopt IEC norms.
The 6 A AC-3 rating governs motor switching. The 440 V AC coil pulls in on a 440 V control supply at 60 Hz. That matters if you're using the NC as a mirror contact for feedback to a safety circuit; you won't get a momentary shoot-through on transition. Mounting is plate or DIN rail, so it drops into the standard 45 mm wide slot in a control panel without needing a custom bracket.
Lifecycle reality — this one is obsolete
The LC1E0610R6 is listed as obsolete by Schneider. No official successor order code appears in the record.
The IP2X finger-safe front means it's fine inside an enclosed panel but not for open washdown areas.