The Schneider Electric LC1E09004F7IN is a 4-pole (4 NO) contactor from the Easy TeSys Control range, rated for AC-1 utilisation category at 40 A up to 415 V with a 110 V AC coil. AC-1 covers resistive loads — heaters, ovens, lighting banks — where inrush current is minimal and the switching duty is steady-state. That 40 A figure is the thermal current the main poles carry continuously, not a motor-starting rating; for motor loads you would need an AC-3 rated contactor.
Standards, approvals, and where this fits in a panel
Mounts on a plate or DIN rail (45 mm wide, 74 mm tall, 80 mm deep) — standard panel footprint for a 4-pole block. IP2X finger protection on the contactor body means it is safe for open-panel mounting where accidental touch is a concern.
What the non-overlap timing and environmental limits tell a commissioning engineer
Ambient operating range is -5 to 55 °C, with storage from -60 to 80 °C; the -20 to 70 °C range at Uc applies to the coil voltage tolerance.