The Schneider LC1E09004V7IN is a 4-pole (4NO) contactor from the Easy TeSys Control range, rated for AC-1 resistive loads up to 25 A at 415 V.
The AC-1 utilisation category means this contactor is rated for switching resistive loads — not motor starting or inductive loads. The 25 A rating at 415 V is the maximum continuous current it can carry in that duty. If your BOM line calls for a 4-pole normally-open contactor on a resistive circuit, this part fits. Fire resistance to 850 °C per IEC 60695-2-1 means it won't propagate a flame in a fault scenario.
IP2X finger protection means it's safe to handle inside an enclosure without additional shrouding. The non-overlap time of 1.5 ms between NC and NO contacts is guaranteed on both energisation and de-energisation — useful if you're interlocking a safety circuit where simultaneous closure would cause a race condition.