The LC1E09008B7IN is a 4-pole contactor from Schneider's Easy TeSys Control range, configured 2NO+2NC. Its AC-1 utilisation category at ≤415 V carries a 25 A resistive load rating — meaning it is sized for heater banks, lighting, or other non-inductive circuits where inrush is minimal. The 24 V coil is the control side to factor into your DC supply budget.
The IP2X finger protection means the contactor itself is touch-safe when installed, but it is not sealed against dust or moisture — keep it inside a panel.
Fire resistance tested to 850 °C per IEC 60695-2-1. The guaranteed non-overlap time of 1.5 ms between NC and NO contacts on both energisation and de-energisation is a detail worth noting if you are interlocking two contactors to avoid a shoot-through condition.