The Schneider Electric LC1E09008E7 is a 4-pole contactor from the Easy TeSys Control range, configured 2NO+2NC, rated AC-1 20A at 48V coil voltage.
Mounts on DIN rail or plate, with dimensions 45 mm wide × 74 mm high × 80 mm deep — standard footprint for panel integration. IP2X finger protection per IEC 60529, so it's safe for open-panel installations where accidental contact is a concern.
Lifecycle reality — obsolete, still sourceable
This part is obsolete per the manufacturer.
The AC-1 20A rating governs resistive loads (heaters, lighting) — this is not a motor-contactor rating. For motor duty you'd need the AC-3 current, which is lower on this frame. The 48V coil is non-standard for many 24V or 120V control systems, so verify your control transformer before specifying.