The Schneider Electric LC1E09008P7IN is a 4-pole (2NO+2NC) contactor from the Easy TeSys Control range, rated for 25 A in AC-1 utilisation category at ≤415 V with a 230 V coil.
The AC-1 25 A rating governs resistive loads — heaters, lighting banks, or any load where inrush is negligible. This is not a motor-contactor rating (AC-3); if your application switches inductive motor loads, this contactor is not the right choice. The 4-pole arrangement with 2 normally-open and 2 normally-closed contacts gives flexibility for interlocking or dual-load switching in a single package. The guaranteed 1.5 ms non-overlap time between NC and NO contacts on both energisation and de-energisation is a safety-relevant spec for applications requiring break-before-make isolation.
Depth is 80 mm, height 74 mm — factor that into enclosure layout and gland-plate clearance. IP2X protection means it is finger-safe but not sealed against dust or moisture; keep it inside a panel. The TH protective treatment (pollution degree 3 per IEC 60068) suits it for industrial environments with moderate conductive pollution. Operating altitude is rated to 3000 m without derating.
Compliance & Environmental
Fire resistance is tested to 850 °C per IEC 60695-2-1. Vibration resistance is 1.5 Gn (contacts open) and 3 Gn (contacts closed); shock resistance is 7 Gn open, 10 Gn closed — figures that matter for transport and machine-mounted applications.