Skip to main content
Log in
Schneider Electric LC1E0910BD — Contactors

Schneider LC1E0910BD Easy TeSys Contactor, 9A AC-3, 24V DC C

MPNLC1E0910BD
Active

Schneider Electric Easy TeSys Control, LC1E0910BD, 3-pole contactor, 9 A AC-3/AC-3e ≤440 V, 24 V DC coil, 1 NO auxiliary contact, DIN-rail/plate mount.

Schneider Electric LC1E0910BD datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

LC1E0910BD — Identification
ParameterValue
Product / component typeContactor
Series / rangeEasy TeSys
ApplicationMotor control Resistive load
LC1E0910BD — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 10 MOhm for signalling circuit
Utilisation categoryAC-3 AC-3e AC-1
LC1E0910BD — Contacts & Poles
ParameterValue
Pole configuration3P
LC1E0910BD — Environmental
ParameterValue
IP degree of protectionIP20 conforming to IEC 60529
Operating altitude3000 m without derating
Mechanical robustnessShocks contactor open (5 Gn for 11 ms) conforming to IEC 60068-2-7 Shocks contactor closed (10 Gn for 11 ms) conforming to IEC 60068-2-7 Vibrations contactor open (1.5 Gn, 5...300 Hz) conforming to IEC 60068-2-6 Vibrations contactor closed (3 Gn, 5...300 Hz) conforming to IEC 60068-2-6
Protective treatment / pollution degreeTH conforming to IEC 60068-2-30 test Db
Fire resistance850 °C conforming to IEC 60695-2-1
LC1E0910BD — Approvals
ParameterValue
StandardsEN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5
LC1E0910BD — Mechanical
ParameterValue
Width45 mm
Height77 mm
Depth93 mm

Product details

Core ratings and integration

The LC1E0910BD is a 3-pole contactor from the Easy TeSys Control range, rated 9 A in AC-3/AC-3e utilisation category at ≤440 V — that is the motor-switching current, so it handles a standard 4 kW (5.5 HP) three-phase induction motor on a 400 V line. The 24 V DC coil matches common PLC or safety-relay outputs without an extra power supply. One normally-open auxiliary contact is built in; additional front- or side-mount aux blocks can be added if the application needs more feedback or interlocking. The 45 mm width (about 2.5 modular units) fits standard enclosure cutouts and leaves room for a thermal overload relay alongside.

The TH protective treatment per IEC 60068-2-30 means it handles damp-heat cycling (condensing humidity), a common requirement for non-climate-controlled enclosures. IP20 finger-safe terminals are standard for panel installation. Compliant with EN/IEC 60947-4-1 (the main contactor standard for motor starters) and GB/T equivalents.

Frequently asked questions

What are the key ratings for the LC1E0910BD?

Three-pole contactor rated 9 A in AC-3/AC-3e at ≤440 V for motor switching, with a 24 V DC coil and one normally-open auxiliary contact. It mounts on DIN rail or plate.

What standards does the LC1E0910BD comply with?

It complies with EN/IEC 60947-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, and the corresponding GB/T standards. Fire resistance is 850 °C per IEC 60695-2-1.

What is the closest pin-compatible alternative in the same family?

Within the Easy TeSys Control range, the LC1E0910M7 uses a 220 V AC 50/60 Hz coil instead of 24 V DC. The mechanical footprint and auxiliary configuration are identical, so the choice comes down to the control voltage available in the panel.

MPN
LC1E0910BD