The Schneider Electric LC1E12004F7IN is a 4-pole (4NO) contactor from the Easy TeSys Control range, rated for AC-1 resistive loads at 32 A up to 415 V with a 110 V coil. The AC-1 utilisation category means this contactor is specified for resistive loads — heaters, lighting banks, or other non-inductive circuits — where the switching current equals the load current without the inrush or power-factor challenges of motor starting. For motor or inductive loads, an AC-3 or AC-4 rated contactor would be the correct choice.
The LC1E12004F7IN carries compliance with EN/IEC 60947-1, EN/IEC 60947-4-1, and EN/IEC 60947-5-1, plus the Chinese GB/T equivalents — covering the contactor's general rules, electromechanical contactor and motor-starter, and control-circuit device standards. Operating altitude is rated to 3000 m without derating, and the permissible ambient temperature range is -5 to 55 °C for operation, with storage from -60 to 80 °C.
Mechanical and switching characteristics
Mechanical robustness is specified for vibration (1.5 Gn open, 3 Gn closed) and shock (7 Gn open, 10 Gn closed), which is adequate for most industrial panel environments.