The Schneider Electric LC1E12004Q7IN is a 4-pole (4 normally-open) contactor from the Easy TeSys Control range, rated for AC-1 utilisation category at 32 A on power circuits up to 415 V. It is designed for resistive load switching — think heater banks or lighting banks rather than motor starts — and carries a 380 V coil.
This order code is marked obsolete by the manufacturer. There is no official successor listed in the record. If you are freezing a new design, look at the current Easy TeSys or TeSys Deca ranges for a functional equivalent; confirm the coil voltage and pole configuration match your panel layout.
The AC-1 rating of 32 A at ≤415 V is the key selection figure. AC-1 covers resistive loads (no inductive kick), so this contactor is not intended for motor duty (AC-3) or DC switching without derating. The 4P (4NO) configuration gives four independent normally-open power poles — useful for switching multiple resistive circuits or a three-phase load plus a neutral. The 380 V coil matches standard European 400 V three-phase panels; the pickup and dropout thresholds follow the EN/IEC 60947 series.