The LC1E1201E5 is a 3-pole contactor from the Easy TeSys Control range, rated for motor control in AC-3 and AC-3e duty at 12 A up to 440 V, with a 48 V AC 50 Hz coil and one normally-closed auxiliary contact. The AC-3 rating is the one that governs switching of three-phase induction motors — 12 A at 440 V covers motors roughly up to 5.5 kW depending on the specific load profile. The AC-1 rating (resistive load) will be higher, but for motor circuits, the AC-3 figure is the one that decides fit. Mounting is via DIN rail or plate, so it fits standard panel layouts. IP2X finger protection means it's safe for open-panel mounting where accidental contact is a concern.
LC1E1201E5 Easy TeSys Contactor, 3P, 12A AC-3, 48V AC Coil
MPNLC1E1201E5
Obsolete
Schneider Electric Easy TeSys Control, LC1E1201E5, 3P(3NO) contactor, AC-3/AC-3e 12A ≤440V, 48V AC coil 50Hz, 1NC auxiliary contact.
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Product / component type | Contactor |
| Series / range | Easy TeSys |
| Application | Motor control Resistive load |
| Parameter | Value |
|---|---|
| Rated operational voltage (Ue) | Power circuit: 10 MOhm for control circuit |
| Utilisation category | AC-3 AC-3e AC-1 |
| Parameter | Value |
|---|---|
| Pole configuration | 3P |
| Parameter | Value |
|---|---|
| IP degree of protection | IP2X conforming to IEC 60529 |
| Operating altitude | 3000 m without derating |
| Mechanical robustness | Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor open (7 Gn for 11 ms) Shocks contactor closed (10 Gn for 11 ms) |
| Protective treatment / pollution degree | TH (pollution degree 3) conforming to IEC 60068-2-30 |
| Fire resistance | 850 °C conforming to IEC 60695-2-1 |
| Parameter | Value |
|---|---|
| Standards | EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5 EN/IEC 60335-1:Clause 30.2 EN/IEC 60335-2-40:Annex JJ |
| Parameter | Value |
|---|---|
| Width | 45 mm |
| Height | 74 mm |
| Depth | 80 mm |
Product details
Frequently asked questions
What are the key ratings for this contactor?
It is a 3-pole contactor rated 12 A in AC-3/AC-3e duty at ≤440 V, with a 48 V AC 50 Hz coil and one NC auxiliary contact. It also carries AC-1 resistive load ratings. Mounting is DIN rail or plate, and it meets EN/IEC 60947 and GB/T 14048 standards.
How do I source this obsolete part?
Send an RFQ. We source verified surplus and broker inventory against your order. No factory stock is available; each unit is inspected before shipment.
MPN
LC1E1201E5