Schneider Electric EasyPact TVS contactor, order code LC1E1210B5, 3 poles (3 NO), 12 A AC-3 at <=440 V, 24 V AC coil, IP2X, DIN-rail/plate mount, discontinued.
| Parameter | Value |
|---|---|
| Product / component type | Contactor |
| Series / range | Easy TeSys |
| Application | Motor control Resistive load |
| Parameter | Value |
|---|---|
| Rated operational voltage (Ue) | Power circuit: 10 MOhm for control circuit |
| Utilisation category | AC-3 AC-3e AC-1 |
| Parameter | Value |
|---|---|
| Pole configuration | 3P |
| Parameter | Value |
|---|---|
| IP degree of protection | IP2X conforming to IEC 60529 |
| Operating altitude | 3000 m without derating |
| Mechanical robustness | Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor open (7 Gn for 11 ms) Shocks contactor closed (10 Gn for 11 ms) |
| Protective treatment / pollution degree | TH (pollution degree 3) conforming to IEC 60068-2-30 test Db |
| Fire resistance | 850 °C conforming to IEC 60695-2-1 |
| Parameter | Value |
|---|---|
| Standards | EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5 EN/IEC 60335-1:Clause 30.2 EN/IEC 60335-2-40:Annex JJ |
| Parameter | Value |
|---|---|
| Width | 45 mm |
| Height | 74 mm |
| Depth | 80 mm |
Rated 12 A in AC-3 and AC-1 categories per EN/IEC 60947-4-1, this contactor switches small three-phase motors or resistive loads up to that current.
Commonly installed in motor control centres, conveyor drives, pump panels, and HVAC equipment where a compact 3-pole contactor is needed for switching loads under 12 A. The IP2X finger-safe enclosure suits enclosed panel mounting.
No related articles