The Schneider Electric LC1E18008F7IN is an Easy TeSys Control contactor — a 4-pole (2NO + 2NC) unit rated for 60 A in AC-1 utilisation category up to 415 V, with a 110 V AC 50/60 Hz coil. For motor or inductive loads you'd need the AC-3 rating, which is lower — this part is built for straightforward on/off of resistive circuits.
IP2X means finger-safe from the front, but it's not sealed; keep it inside an enclosure, not out in the weather. Rated for operation at altitudes up to 3000 m and ambient temps from -5 °C to 55 °C, with storage down to -60 °C. That covers most control cabinets in heated plants or even unheated warehouses, as long as condensation isn't an issue.
That covers the main industrial control gear standards for contactors.
Non-overlap timing — a detail that matters for safety circuits
That means the normally-closed and normally-open sets never close at the same instant — important if you're using the NC as a feedback mirror in a safety circuit or a mechanical interlock.