Skip to main content
Schneider Electric LC1E1801BD — Contactors

Schneider LC1E1801BD Easy TeSys Contactor, 3P, 18A, 24V DC C

MPNLC1E1801BD
Active

Schneider Electric Easy TeSys Control, contactor, LC1E1801BD, 3P(3NO), AC-3/AC-3e ≤440V, 18A, 24V DC coil, 1 NC auxiliary contact.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

LC1E1801BD — Identification
ParameterValue
Product / component typeContactor
Series / rangeEasy TeSys
ApplicationMotor control Resistive load
LC1E1801BD — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 10 MOhm for signalling circuit
Utilisation categoryAC-3 AC-3e AC-1
LC1E1801BD — Contacts & Poles
ParameterValue
Pole configuration3P
LC1E1801BD — Environmental
ParameterValue
IP degree of protectionIP20 conforming to IEC 60529
Operating altitude3000 m without derating
Mechanical robustnessShocks contactor open (5 Gn for 11 ms) conforming to IEC 60068-2-7 Shocks contactor closed (10 Gn for 11 ms) conforming to IEC 60068-2-7 Vibrations contactor open (1.5 Gn, 5...300 Hz) conforming to IEC 60068-2-6 Vibrations contactor closed (3 Gn, 5...300 Hz) conforming to IEC 60068-2-6
Protective treatment / pollution degreeTH conforming to IEC 60068-2-30 test Db
Fire resistance850 °C conforming to IEC 60695-2-1
LC1E1801BD — Approvals
ParameterValue
StandardsEN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5
LC1E1801BD — Mechanical
ParameterValue
Width45 mm
Height77 mm
Depth93 mm

Product details

What the ratings mean for fit

The LC1E1801BD: The AC-3 rating at 18 A means it's sized for direct-on-line starting of three-phase squirrel-cage motors up to roughly 7.5 kW at 400 V. The same contactor also carries an AC-1 rating for resistive loads — useful if you're switching heaters or lighting banks in the same panel. The 24 V DC coil draws steady current with no hum; verify your control supply can hold above the dropout threshold under load. IP20 finger-safe terminals mean it's intended for inside an enclosure — not for washdown or outdoor exposure. Mounts on DIN rail or directly to a backplate, so it fits standard panel layouts without special brackets.

Frequently asked questions

What compliance documentation does Schneider provide for this contactor?

The contactor is designed to EN/IEC 60947-1, EN/IEC 60947-4-1, and EN/IEC 60947-5-1, plus the Chinese GB/T equivalents. Fire resistance is tested to 850 °C per IEC 60695-2-1. Protective treatment TH per IEC 60068-2-30 covers humid heat cycling.

MPN
LC1E1801BD