It carries an AC-3 utilisation category rating of 18 A at up to 440 V, meaning it handles the high inrush of a standard induction motor during start and the lower running current without derating. The 110 V AC 50 Hz coil pulls in reliably across the operating temperature band (-5 to 55 °C operation, -20 to 70 °C at coil rated voltage).
The contactor is certified to EN/IEC 60947-1, -4-1, and -5-1, plus the Chinese GB/T equivalents — covering the main product standard for contactors and motor-starters. It also passes the glow-wire test at 850 °C per IEC 60695-2-1, and the TH protective treatment (pollution degree 3, per IEC 60068-2-30) means it withstands damp-heat cycling typical in non-conditioned industrial enclosures.
Mounts on DIN rail or directly to a plate — the 45 mm width and 80 mm depth fit standard 45 mm DIN-rail spacing, leaving room for side-by-side grouping with other Easy TeSys control gear. IP2X finger protection on the front means it's safe for open-panel wiring as long as the enclosure restricts tool access.