Manifest
The Schneider LC1E200ADCH2S260N is a single-pole DC contactor from the Easy TeSys Control range, built for 200 A resistive loads on a 12 V DC coil. Rated for 1000 V DC maximum switching voltage with a conventional free-air thermal current (Ith) of 200 A for the power circuit. The coil holds at 12 V DC nominal and drops out between 0.1 and 0.75 Uc, covering control circuit tolerances. Mechanical durability is 300,000 cycles; electrical durability is specified at 1500 cycles making/breaking 200 A at 750 V DC under resistive load. IP60 rated – dust-tight but not sealed against water, so keep it inside a panel.
Sourcing & Lifecycle
Mounts vertically on a support; tighten power circuit connections to 8-10 Nm (70.8-88.5 lbf·in) on the M8 bolts.