The Schneider LC1E25008V7IN is a 4-pole contactor from the Easy TeSys Control range, rated AC-1 at 50 A for resistive loads up to 415 V, with a 400 V coil. The AC-1 utilisation category means it is rated for switching resistive loads — no motor starting or inductive breaking. For motor duty you would need an AC-3 rated contactor.
What the specs mean for panel integration
At 93 mm deep, 56 mm wide, and 64 mm tall, this contactor fits a standard DIN-rail footprint. It carries TH protective treatment (pollution degree 3) per IEC 60068, so it handles the typical industrial panel environment with moderate conductive pollution.
These cover the general rules, contactors and motor-starters, and control-circuit devices respectively. The 4-pole configuration is 2NO+2NC, which gives flexibility for switching two independent resistive circuits or using the NC poles for interlocking.