The Schneider Electric LC1E2501F6 is a 3-pole contactor from the Easy TeSys Control range, rated for 25 A in AC-3 and AC-3e duty at voltages up to 440 V. The coil is 110 V AC, 60 Hz, and the contactor carries one normally-closed auxiliary contact. It mounts to either a DIN rail or a plate.
The AC-1 rating (resistive load) is typically higher, but for motor duty, AC-3 is the figure that decides fit. The 110 V AC coil at 60 Hz means it is specced for North American-style control voltages on a 60 Hz supply; a 50 Hz coil of the same voltage would draw a different hold-in current. The single NC auxiliary is built in — no add-on block needed for that one feedback or interlock signal.
It also meets EN/IEC 60335-1 Clause 30.2 and EN/IEC 60335-2-40 Annex JJ for fire resistance — the contactor withstands 850 °C glow-wire test per IEC 60695-2-1.
Mechanical and integration notes
Mechanical robustness is specified: 1.5 Gn vibration tolerance when open, 3 Gn when closed; shock tolerance is 10 Gn for 11 ms when closed, 6 Gn when open. That is adequate for most industrial panel environments, not for high-shock mobile equipment.