Skip to main content
Log in
Schneider Electric LC1E2501Q7 — Contactors

Schneider LC1E2501Q7 Easy TeSys Contactor, 25A AC-3, 380VAC

MPNLC1E2501Q7
Obsolete

Schneider Electric Easy TeSys Control, LC1E2501Q7, 3-pole contactor, 25 A AC-3/AC-3e at ≤440 V, 380 V AC 50/60 Hz coil, 1 NC auxiliary contact, obsolete.

Schneider Electric LC1E2501Q7 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

LC1E2501Q7 — Identification
ParameterValue
Product / component typeContactor
Series / rangeEasy TeSys
ApplicationMotor control Resistive load
LC1E2501Q7 — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 10 MOhm for control circuit
Utilisation categoryAC-3 AC-3e AC-1
LC1E2501Q7 — Contacts & Poles
ParameterValue
Pole configuration3P
LC1E2501Q7 — Environmental
ParameterValue
IP degree of protectionIP2X conforming to IEC 60529
Operating altitude3000 m without derating
Mechanical robustnessVibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor closed (10 Gn for 11 ms) Shocks contactor open (6 Gn for 11 ms)
Protective treatment / pollution degreeTH (pollution degree 3) conforming to IEC 60068-2-30 test Db
Fire resistance850 °C conforming to IEC 60695-2-1
LC1E2501Q7 — Approvals
ParameterValue
StandardsEN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5 EN/IEC 60335-1:Clause 30.2 EN/IEC 60335-2-40:Annex JJ
LC1E2501Q7 — Mechanical
ParameterValue
Width45 mm
Height74 mm
Depth85 mm

Product details

It carries a 25 A rating in AC-3 and AC-3e duty at ≤440 V, meaning it is sized for switching three-phase induction motors up to that current — the AC-3 category per EN/IEC 60947-4-1 covers starting and disconnecting squirrel-cage motors under load. The 380 V AC coil at 50/60 Hz pulls in the main contacts, and the integrated 1 NC auxiliary contact provides a feedback or interlock signal without a separate block.

For resistive loads (AC-1), the same contactor can handle higher continuous current, but the AC-3 figure is the one that decides fit for a motor starter. Ambient operating temperature range is -5 to 55 °C, with storage from -60 to 80 °C, and it operates at altitudes up to 3000 m without derating.

It also meets GB/T 14048.1.4, and.5 (Chinese national standards), and portions of EN/IEC 60335 (household appliance safety) for glow-wire and fire resistance.

Frequently asked questions

What are the key ratings for the LC1E2501Q7?

It is a 3-pole contactor rated 25 A in AC-3/AC-3e duty at ≤440 V, with a 380 V AC 50/60 Hz coil and one NC auxiliary contact. It mounts on a DIN rail, measures 45 mm wide by 85 mm deep by 74 mm high, and operates from -5 to 55 °C.

What standards does the LC1E2501Q7 comply with?

It complies with EN/IEC 60947-1, -4-1, -5-1, GB/T 14048.1.4.5, and portions of EN/IEC 60335. Fire resistance is 850 °C per IEC 60695-2-1, and it has TH protective treatment for tropical environments.

How do I source the LC1E2501Q7 if it is obsolete?

Since it is obsolete, it is not available new from the factory. We can source it through our surplus and broker network — submit an RFQ and we will check availability and pricing from our multi-source channels.

MPN
LC1E2501Q7