The Schneider Electric LC1E2501U5 is a three-pole contactor from the EasyPact TVS range, part of the Easy TeSys Control series. It is designed for motor control and resistive load switching, rated for AC-3, AC-3e, and AC-1 utilisation categories. The headline rating is 25 A in AC-3 duty at up to 440 V, meaning it can switch three-phase induction motors of that current class — typical for a 7.5 kW motor at 400 V. The 240 V AC coil suits standard control voltage supplies in many regions.
The AC-3 rating of 25 A at ≤440 V is the one that governs motor duty; if your load is purely resistive, the AC-1 rating will be higher, but the AC-3 figure is the one to match to your motor FLA. That means it meets the required making/breaking capacity and overload co-ordination for industrial motor circuits. The non-overlap time of 1.5 ms on both energisation and de-energisation is guaranteed between NC and NO contacts. This prevents momentary short-circuits in reversing or star-delta circuits where both contactors could otherwise overlap. For continuous operation, keep ambient below 55 °C.
Where it goes in the panel
IP2X protection means it is touch-safe on the front but not sealed against dust or moisture — install inside a panel with a door, not in a washdown zone.
The TH protective treatment (pollution degree 3) confirms it is suitable for controlled industrial environments.