Skip to main content
Log in
Schneider Electric LC1E2510B6 — Contactors

Schneider EasyPact TVS LC1E2510B6 Contactor, 25 A AC-3, 24 V

MPNLC1E2510B6
Obsolete

Schneider Electric EasyPact TVS contactor, 3P (3 NO), AC-3 ≤ 440 V 25 A, 24 V AC coil, obsolete.

Schneider Electric LC1E2510B6 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

LC1E2510B6 — Identification
ParameterValue
Product / component typeContactor
Series / rangeEasy TeSys
ApplicationMotor control Resistive load
LC1E2510B6 — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 10 MOhm for control circuit
Utilisation categoryAC-3 AC-3e AC-1
LC1E2510B6 — Contacts & Poles
ParameterValue
Pole configuration3P
LC1E2510B6 — Environmental
ParameterValue
IP degree of protectionIP2X conforming to IEC 60529
Operating altitude3000 m without derating
Mechanical robustnessVibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor closed (10 Gn for 11 ms) Shocks contactor open (6 Gn for 11 ms)
Protective treatment / pollution degreeTH (pollution degree 3) conforming to IEC 60068-2-30 test Db
Fire resistance850 °C conforming to IEC 60695-2-1
LC1E2510B6 — Approvals
ParameterValue
StandardsEN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5 EN/IEC 60335-1:Clause 30.2 EN/IEC 60335-2-40:Annex JJ
LC1E2510B6 — Mechanical
ParameterValue
Width45 mm
Height74 mm
Depth85 mm

Product details

The Schneider Electric LC1E2510B6 is a 3-pole EasyPact TVS contactor from the Easy TeSys Control range, rated for AC-3 motor-switching duty at 25 A up to 440 V, with a 24 V AC coil. It also covers AC-3e and AC-1 utilisation categories, making it suitable for both motor control and resistive loads. The 25 A AC-3 rating governs motor selection. The AC-1 rating for resistive loads is higher.

Dimensions are 85 mm deep by 74 mm high — compact enough for retrofit into existing enclosures.

Because it is obsolete, there is no official factory successor order code listed. A form-fit-function substitute may exist, but without a published cross-reference, verify fit against the original panel wiring and load.

Operates without derating up to 3000 m altitude, and the coil holds from -20 to 70 °C ambient — wide enough for most indoor industrial settings.

Frequently asked questions

What is the closest alternative to the LC1E2510B6?

No official successor order code is published. A form-fit-function substitute from the same Easy TeSys family may exist, but without a confirmed cross-reference, you should verify electrical and mechanical fit against your panel before ordering a replacement.

What are the key ratings of the LC1E2510B6?

It is a 3-pole contactor rated 25 A in AC-3 (motor) duty up to 440 V, with a 24 V AC coil. It also covers AC-3e and AC-1 utilisation categories, and mounts on DIN rail or plate.

What compliance documentation is available for the LC1E2510B6?

It is certified to EN/IEC 60947-1, -4-1, -5-1 and the equivalent GB/T standards. Fire resistance is tested to 850 °C per IEC 60695-2-1, and protective treatment TH (pollution degree 3) per IEC 60068-2-30 is confirmed.

MPN
LC1E2510B6