The LC1E2510BD is a 3-pole contactor rated 25 A in AC-3 duty (motor switching) at ≤440 V, so it directly controls a 3-phase induction motor up to roughly 7.5 kW at 400 V. The same pole set also carries an AC-1 resistive load rating — useful for heater banks or lighting where inrush is minimal. The AC-3e category means it's tested for the enhanced electrical endurance profile typical of modern motor starters. The 24 V DC coil keeps it compatible with PLC-driven or safety-relay outputs without an intermediate interface relay.
The 45 mm width fits a standard 4-module slot in a DIN-rail enclosure. IP20 finger-safe terminals mean it can sit in an open panel without additional shrouding — standard for control cabinets. The 93 mm depth leaves clearance for wiring ducts or a second row of components.
Certified to EN/IEC 60947-4-1 (contactors and motor-starters) and EN/IEC 60947-5-1 (control-circuit devices). Also carries GB/T equivalents for the Chinese market. Fire resistance rated 850 °C per IEC 60695-2-1. Protective treatment TH (IEC 60068-2-30) means it withstands tropical humid conditions — no additional conformal coating needed for most indoor environments.