The Schneider Electric LC1E2510F7 is a 3-pole (3 NO) contactor from the Easy TeSys Control range, rated for AC-3 duty at 25 A up to 440 V and a 110 V AC coil. It is designed for motor control and resistive load switching, with utilisation categories AC-3, AC-3e, and AC-1. The contactor mounts on a DIN rail or plate, measures 45 mm wide by 74 mm high by 85 mm deep, and carries an IP2X degree of protection per IEC 60529 — suitable for installation inside a control cabinet where finger access is limited. It complies with EN/IEC 60947-1, 60947-4-1, and 60947-5-1, plus GB/T 14048 equivalents, and meets fire-resistance requirements at 850 °C per IEC 60695-2-1.
The AC-3 rating of 25 A at ≤440 V defines the contactor's motor-switching capability — it can handle starting and stopping of squirrel-cage motors up to that current. The AC-1 rating covers resistive loads (heating, lighting) at a higher current, though the exact value is not listed here. The 110 V AC coil voltage must match the control circuit supply. Operating altitude is 3000 m without derating, and permissible ambient temperature ranges from -20 °C to 70 °C at the coil (Uc), with storage from -60 °C to 80 °C and operation from -5 °C to 55 °C.