The LC1E2510M6 is an active-production 3-pole contactor from the Easy TeSys Control range, rated 25 A in AC-3 duty at ≤440 V — that is the motor-switching current for starting and stopping a 3-phase induction motor under full load. The 220 V AC 60 Hz coil pulls in reliably across the -20 to 70 °C ambient range at rated voltage. The non-overlap time of 1.5 ms on both energisation and de-energisation, guaranteed between NC and NO contacts, means the contactor can be used in safety circuits where a break-before-make sequence is required — no momentary bridging between poles during transition.
The IP2X finger-safe front cover meets IEC 60529, so it's acceptable for open-panel builds where accidental contact is a risk.
Certified to EN/IEC 60947-1, -4-1, -5-1, plus the corresponding GB/T equivalents, and meets the glow-wire test at 850 °C per IEC 60695-2-1. The TH protective treatment (pollution degree 3) per IEC 60068-2-30 means it withstands humid, tropical environments — relevant for food-and-bev or HVAC installations where condensation is routine.