It complies with EN/IEC 60947-1, 60947-4-1, and 60947-5-1, plus the Chinese GB/T equivalents — the 60947-4-1 standard specifically covers contactors and motor-starters, so this part is certified for the motor control role it is rated for.
Sourcing reality — obsolete, sourced to order
Because the Easy TeSys Control range is a predecessor to the current TeSys D and TeSys Deca families, an official cross-reference to a current order code is not published in the available lifecycle data. A buyer holding this on a BOM should verify the mounting footprint and coil voltage against a TeSys D equivalent before committing a replacement.
Integration notes for panel builders
At 45 mm wide and 85 mm deep, the LC1E2510Q6 occupies one standard modular slot on a DIN rail. The 74 mm height leaves clearance under a 100 mm enclosure lid. The IP2X finger-safe front face means it can sit in a panel without additional shrouding for basic touch protection. The contactor includes a guaranteed non-overlap time of 1.5 ms between NC and NO contacts on both energisation and de-energisation — this prevents a momentary short-circuit when switching between contactor pairs in reversing or star-delta starters.