The Schneider Electric LC1E2510Q7 is a 3-pole contactor from the Easy TeSys Control range, rated 25 A in AC-3 / AC-3e utilisation category at ≤440 V, with a 380 V AC 50/60 Hz coil and one normally-open auxiliary contact.
The 380 V AC coil is line-powered; verify control voltage matches your panel supply. The 1.5 ms non-overlap time between NC and NO contacts ensures break-before-make in reversing or star-delta circuits.
The protective treatment (TH) per IEC 60068-2-30 certifies resistance to damp heat, pollution degree 3 — meaning it can be installed in environments with conductive pollution or occasional condensation. IP2X finger protection is provided by the enclosure.
Integration Notes
The 380 V AC coil draws its control power directly from the line; no separate control transformer is needed if the panel supply matches. The single NO auxiliary contact provides status feedback; if more auxiliary contacts are required, add a side-mount block (not included). Altitude derating begins above 3000 m; operation at ambient up to 55 °C is permissible.