Skip to main content
Log in
Schneider Electric LC1E2510R6 — Contactors

Schneider Electric LC1E2510R6 Contactor, Easy TeSys, 3P, 25A

MPNLC1E2510R6
Obsolete

Schneider Electric Easy TeSys Control contactor, LC1E2510R6, 3P(3NO), AC-3/AC-3e ≤440V 25A, 440V AC coil 60Hz, 1NO auxiliary contact.

Schneider Electric LC1E2510R6 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

LC1E2510R6 — Identification
ParameterValue
Product / component typeContactor
Series / rangeEasy TeSys
ApplicationMotor control Resistive load
LC1E2510R6 — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 10 MOhm for control circuit
Utilisation categoryAC-3 AC-3e AC-1
LC1E2510R6 — Contacts & Poles
ParameterValue
Pole configuration3P
LC1E2510R6 — Environmental
ParameterValue
IP degree of protectionIP2X conforming to IEC 60529
Operating altitude3000 m without derating
Mechanical robustnessVibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor closed (10 Gn for 11 ms) Shocks contactor open (6 Gn for 11 ms)
Protective treatment / pollution degreeTH (pollution degree 3) conforming to IEC 60068-2-30 test Db
Fire resistance850 °C conforming to IEC 60695-2-1
LC1E2510R6 — Approvals
ParameterValue
StandardsEN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5 EN/IEC 60335-1:Clause 30.2 EN/IEC 60335-2-40:Annex JJ
LC1E2510R6 — Mechanical
ParameterValue
Width45 mm
Height74 mm
Depth85 mm

Product details

The Schneider Electric LC1E2510R6 is a 3-pole contactor from the Easy TeSys Control range, rated for 25 A in AC-3 and AC-3e duty at up to 440 V — meaning it switches three-phase motor loads up to that current under full load. The 440 V AC coil at 60 Hz pulls in the armature; a single NO auxiliary contact is built in for feedback or interlocking.

This order code is marked obsolete by the manufacturer. If your design can accommodate a parametric substitute, the Easy TeSys Control family includes active variants with similar footprints and ratings; verify coil voltage and auxiliary configuration before swapping.

IP2X finger protection on the enclosure. TH treatment (pollution degree 3) per IEC 60068-2-30 means it withstands humid, tropical environments.

Frequently asked questions

What replaces the LC1E2510R6?

No official successor order code is provided in the lifecycle record. For a direct replacement, you would need to cross-reference within the Easy TeSys Control family by coil voltage (440 V AC 60 Hz), pole count (3P), and auxiliary configuration (1NO). Contact your sourcing desk with the full duty requirements for a parametric match.

What are the key ratings of the LC1E2510R6?

3-pole contactor rated 25 A in AC-3/AC-3e duty at ≤440 V. Coil is 440 V AC at 60 Hz. Includes one normally-open auxiliary contact. Mounts on DIN rail or plate. Dimensions: 45 mm wide, 74 mm high, 85 mm deep.

What standards does the LC1E2510R6 comply with?

Compliant with EN/IEC 60947-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, and the corresponding GB/T standards. Also meets EN/IEC 60335-1 Clause 30.2 and EN/IEC 60335-2-40 Annex JJ for appliance applications. Fire resistance rated at 850 °C.

MPN
LC1E2510R6