Schneider Electric, Easy TeSys, Contactor, LC1E300ASCH2S260N, 1-pole, 300 A, 1000 V DC, 12 V DC coil, IP60.
| Parameter | Value |
|---|---|
| Product / component type | Contactor |
| Series / range | Easy TeSys |
| Application | Resistive load |
| Parameter | Value |
|---|---|
| Utilisation category | DC-1 |
| Parameter | Value |
|---|---|
| Pole configuration | 1P |
| Parameter | Value |
|---|---|
| IP degree of protection | IP60 |
| Operating altitude | 13123.36 ft (4000 m) without derating |
| Mechanical robustness | Vibrations 5 g, 10...500 Hz) Shocks 20 g for 11 ms) |
| Parameter | Value |
|---|---|
| Standards | IEC 60947-4-1 GB/T 14048.4 |
| Parameter | Value |
|---|---|
| Width | 2.6 in (66.5 mm) |
| Height | 2.9 in (74.3 mm) |
| Depth | 3.2 in (81.3 mm) |
The LC1E300ASCH2S260N: Mounts vertically; power connections M8 bolts torqued to 8–10 Nm (70.8–88.5 lbf·in); control circuit 40 cm two-wire fly lead with one NO auxiliary. Permissible short-time: 400 A 10 min, 600 A 5 min, 1000 A 30 s.
Inrush power is 32 W, holding at 3.5 W DC. Dropout threshold is 0.75 Uc, which can act as a low-voltage release.
1000 V DC, making the contactor suitable for high-voltage DC resistive loads.
Easy TeSys Control range from Schneider Electric.
No related articles