Schneider Electric Easy TeSys LC1E300PCH2S260N, a DC-coil contactor rated for 300 A continuous resistive load at up to 1000 V DC.
| Parameter | Value |
|---|---|
| Product / component type | Contactor |
| Series / range | Easy TeSys |
| Application | Resistive load |
| Parameter | Value |
|---|---|
| Pole configuration | 1P |
| Parameter | Value |
|---|---|
| IP degree of protection | IP60 |
| Operating altitude | 13123.36 ft (4000 m) without derating |
| Mechanical robustness | Vibrations 5 g, 10...500 Hz) Shocks 20 g for 11 ms) |
| Parameter | Value |
|---|---|
| Standards | IEC 60947-4-1 GB/T 14048.4 |
| Parameter | Value |
|---|---|
| Width | 2.6 in (66.5 mm) |
| Height | 2.9 in (74.3 mm) |
| Depth | 3.2 in (81.3 mm) |
The Schneider LC1E300PCH2S260N is a single-pole normally-open contactor built for resistive DC loads. Coil holds at 12...32 V DC with 2.4 W holding power; dropout range 0.1...0.75 Uc ensures reliable release. Switching tested at 1000 V DC, with a minimum of 0.1 A at 8 V DC. Mechanical endurance rated at 300,000 cycles. Mount vertical only as per the support spec.
The depth is 3.2 in (81.3 mm).
It is part of the Easy TeSys range.
It complies with IEC 60947-4-1 and GB/T 14048.4.
No related articles