Schneider Electric Easy TeSys Control, LC1E32004P7IN, 4P(4NO) contactor, AC-1 ≤415V 55A, 230V coil, obsolete.
| Parameter | Value |
|---|---|
| Product / component type | Contactor |
| Series / range | Easy TeSys |
| Application | Resistive load |
| Parameter | Value |
|---|---|
| Rated operational voltage (Ue) | Power circuit: 10 MOhm for control circuit |
| Utilisation category | AC-1 |
| Parameter | Value |
|---|---|
| Pole configuration | 4P |
| Parameter | Value |
|---|---|
| IP degree of protection | IP2X conforming to IEC 60529 |
| Operating altitude | 3000 m |
| Mechanical robustness | Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor closed (10 Gn for 11 ms) Shocks contactor open (6 Gn for 11 ms) |
| Protective treatment / pollution degree | TH (pollution degree 3) conforming to IEC 60068 |
| Fire resistance | 850 °C conforming to IEC 60695-2-1 |
| Parameter | Value |
|---|---|
| Standards | EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5 |
| Parameter | Value |
|---|---|
| Width | 56 mm |
| Height | 64 mm |
| Depth | 93 mm |
The Schneider Electric LC1E32004P7IN is a 4-pole (4NO) contactor from the Easy TeSys Control range, rated for resistive loads at 55 A in AC-1 utilisation category up to 415 V with a 230 V coil. Mounts on a plate or DIN rail.
The protective treatment is TH (pollution degree 3) per IEC 60068, meaning it's suited for environments with moderate conductive pollution — typical for a ventilated enclosure, not a sealed washdown zone. IP2X finger protection on the contactor body.
It is a 4-pole (4NO) contactor rated 55 A in AC-1 utilisation category at up to 415 V, with a 230 V coil. It is designed for resistive loads, not motor starting.
It complies with EN/IEC 60947-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, and the Chinese GB/T 14048.1, 14048.4, and 14048.5 standards. Fire resistance is 850 °C per IEC 60695-2-1.
No related articles