The Schneider LC1E32008F7IN is an Easy TeSys contactor, a 4-pole device configured 2 NO + 2 NC, rated for resistive loads in AC-1 utilisation category. It carries a 16 A rating at up to 415 V and uses a 110 V AC coil.
For motor duty you'd need the AC-3 rating, which this part doesn't carry. The 4P (2 NO + 2 NC) pole configuration means it can switch two independent resistive circuits or use the NC poles for aux control interlocks.
DIN rail or plate mount. Dimensions: 64 mm high, 56 mm wide, 93 mm deep. That 93 mm depth is the key clearance number for shallow enclosures — check your gland plate or back-panel depth before committing. IP2X finger protection on the contactor body, so it's safe for open-panel work during commissioning.