The Schneider Electric LC1E32008M7IN is a 4-pole contactor from the Easy TeSys Control range, rated AC-1 at 55 A up to 415 V with a 220 V coil.
The AC-1 utilisation category means this contactor is rated for switching resistive loads — heaters, ovens, lighting — where the current inrush is low and the power factor is near unity. At 55 A on a ≤415 V line, it handles about 23 kW of resistive load per pole. Don't use the AC-1 figure for motor starting; that would need an AC-3 rating (typically much lower for the same frame). The 4P configuration with mixed NO/NC poles gives flexibility for interlocking or dual-load circuits without adding auxiliary contact blocks. Mounts on DIN rail or a plate, so it fits standard panel layouts. IP2X protection means finger-safe from the front but not sealed — keep it inside an enclosure. It also meets GB/T equivalents for Chinese market installations. Operating altitude up to 3000 m means it can be used in high-altitude plants without derating — something not all contactors in this class offer.
The 93 mm depth is the key clearance dimension when fitting into a shallow enclosure; check that your panel depth accommodates it plus wiring space behind. DIN-rail mounting speeds replacement, but the plate-mount option works for back-panel layouts where rail space is tight.