The LC1E3210E5 is a 3-pole contactor from Schneider Electric's Easy TeSys Control range, branded EasyPact TVS. The part also carries AC-3e and AC-1 utilisation categories, meaning it handles both standard motor starts and resistive loads. Mounting is via DIN rail or plate, making it a standard panel fit. The contactor is IP2X rated, suitable for enclosed panel use where finger protection is sufficient. It complies with EN/IEC 60947-1, -4-1, -5-1, and GB/T equivalents, plus fire resistance at 850 °C per IEC 60695-2-1. Protective treatment is TH (pollution degree 3) per IEC 60068-2-30, meaning it handles damp heat environments typical in industrial enclosures.
No official successor order code is listed in the lifecycle record. A parametric cross-reference to a current-production equivalent requires matching the coil voltage (48 V AC), pole count (3P), and AC-3 current rating (32 A) within the same Easy TeSys or TeSys Deca family.
The AC-3 rating of 32 A at ≤440 V is the motor-switching current — this contactor will start and stop a 3-phase induction motor drawing up to 32 A under full load. The AC-1 rating covers resistive loads at the same current, useful for heater banks or lighting. Coil is 48 V AC. Operating altitude is 3000 m without derating — fine for most installations outside high-altitude mining or mountain sites.