The Schneider Electric LC1E3210Q5 is a 3-pole (3 NO) EasyPact TVS contactor from the Easy TeSys Control range, rated for 32 A in AC-3 duty at up to 440 V. That AC-3 rating means it's sized for starting and stopping squirrel-cage induction motors — the most common load in industrial panels. The 380 V AC coil matches standard European 400 V line supplies (coil tolerance covers typical dips). For a 400 V motor, that typically covers up to about 15 kW depending on the exact duty cycle.
Depth is 86 mm, which matters when you're laying out a shallow enclosure and need to clear the door or gland plate. The IP2X finger protection on the contactor body means it's safe for open-panel mounting where operators might reach in, but it's not sealed against dust or moisture — keep it inside the enclosure.
Operates from -5 °C to 55 °C ambient, with storage from -60 °C to 80 °C. The TH protective treatment (pollution degree 3 per IEC 60068-2-30) means it's built for humid, mildly corrosive environments — typical for HVAC or food-processing panels that see condensation cycles. Fire resistance tested to 850 °C per IEC 60695-2-1, which satisfies the glow-wire requirements for household appliance standards (EN/IEC 60335).