The Schneider Electric LC1E3210R6 is a three-pole contactor from the Easy TeSys Control range, rated for motor control in AC-3 and AC-3e duty up to 32 A at 440 V, with a 440 V AC 60 Hz coil and one normally open auxiliary contact.
The AC-3 rating of 32 A at 440 V governs its motor-switching capability — this is the current it can make and break under full-load motor starting conditions, not just carry continuously. For resistive loads (AC-1), the contactor can handle higher currents, but the AC-3 figure is the one that decides fit for standard induction motor duty. The 440 V AC coil means it pulls in reliably on a 440 V control circuit at 60 Hz; verify your control transformer matches both voltage and frequency. The TH protective treatment per IEC 60068-2-30 means it withstands damp heat and pollution degree 3 environments — typical for unheated enclosures in humid industrial halls.