Schneider Electric Easy TeSys Control contactor, LC1E3801M7, 3P (3NO), AC-3/AC-3e ≤440V, 38A, 220V AC coil 50/60Hz, 1NC auxiliary contact.
| Parameter | Value |
|---|---|
| Product / component type | Contactor |
| Series / range | Easy TeSys |
| Application | Motor control Resistive load |
| Parameter | Value |
|---|---|
| Rated operational voltage (Ue) | Power circuit: 10 MOhm for control circuit |
| Utilisation category | AC-3 AC-3e AC-1 |
| Parameter | Value |
|---|---|
| Pole configuration | 3P |
| Parameter | Value |
|---|---|
| IP degree of protection | IP2X conforming to IEC 60529 |
| Operating altitude | 3000 m without derating |
| Mechanical robustness | Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor closed (10 Gn for 11 ms) Shocks contactor open (6 Gn for 11 ms) |
| Protective treatment / pollution degree | TH (pollution degree 3) conforming to IEC 60068-2-30 test Db |
| Fire resistance | 850 °C conforming to IEC 60695-2-1 |
| Parameter | Value |
|---|---|
| Standards | EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5 EN/IEC 60335-1:Clause 30.2 EN/IEC 60335-2-40:Annex JJ |
| Parameter | Value |
|---|---|
| Width | 56 mm |
| Height | 84 mm |
| Depth | 86 mm |
The 220 V AC coil operates at 50/60 Hz, and the built-in 1NC auxiliary contact gives you a feedback or interlock signal without adding a side-mount block.
The AC-3e rating extends that for energy-efficient motors with higher inrush. AC-1 (resistive) is higher but less critical for motor duty.
Dimensions are 86 mm deep, 56 mm wide, 84 mm high, so it fits a typical 45 mm DIN-rail footprint with room for wiring. The IP2X finger protection means it's safe for open-panel use, but not washdown.
38 A in AC-3 / AC-3e duty at ≤440 V, with a 220 V AC 50/60 Hz coil. It has three main poles (3NO) and one NC auxiliary contact. Dimensions: 86 mm deep, 56 mm wide, 84 mm high.
It complies with EN/IEC 60947-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, GB/T 14048.1, GB/T 14048.4, GB/T 14048.5, and EN/IEC 60335-1 Clause 30.2 / EN/IEC 60335-2-40 Annex JJ for fire resistance at 850 °C.
No related articles