The Schneider Electric LC1E40008P7IN is a 4-pole contactor from the Easy TeSys Control range, rated for resistive-load switching in AC-1 utilisation category at 72 A up to 415 V, with a 230 V coil. It carries two normally-open and two normally-closed power poles, and mounts to either a plate or a DIN rail.
The AC-1 rating at 72 A defines the continuous resistive load this contactor can make and break — think heater banks, lighting, or transformer primary switching, not motor starts. The 230 V coil is standard for European control circuits; verify your control voltage matches before wiring. IP2X finger protection means the contactor is safe for open-panel mounting but not for washdown environments. The 110 mm depth and 85 mm width fit a standard DIN-rail footprint, but the 127 mm height may crowd a shallow enclosure lid.