The Schneider Electric LC1E65004M7IN is a 4-pole (4 normally-open) contactor from the Easy TeSys Control range, rated for resistive load switching in AC-1 utilisation category at 85 A up to 415 V. It carries a 4220 V control coil and is designed for DIN rail or plate mounting in control panels. Rated operational voltage for the power circuit is specified alongside a 10 MOhm insulation resistance for the control circuit. The contactor meets EN/IEC 60947-1, 60947-4-1, and 60947-5-1, plus the Chinese GB/T equivalents, with IP2X finger protection per IEC 60529.
The AC-1 rating of 85 A at ≤415 V defines the contactor's capacity for resistive loads — heaters, lighting banks, or non-inductive circuits. AC-1 is the least demanding switching duty because there is no motor inrush or inductive arc to manage, so this rating is the maximum continuous current the main poles can carry in that service. For motor loads (AC-3 duty), the rated current would be lower; this part is not specified for that category. The 4-pole configuration with all four contacts normally open suits applications requiring simultaneous switching of multiple resistive circuits or a three-phase load plus a neutral line. The 4220 V control coil voltage is a standard 50/60 Hz AC coil — verify the control supply matches before installation. The operating ambient temperature range is -5 to 55 °C, with storage from -60 to 80 °C, and the device is TH-treated for pollution degree 3 environments.