The LC1E65008B7IN is a 4-pole (2NO+2NC) contactor from the Schneider Easy TeSys Control range, rated for 85 A in AC-1 utilisation category at ≤415 V with a 24 V coil. AC-1 means it is designed for resistive loads — heaters, lighting banks, or other loads where the current waveform stays close to sinusoidal and inrush is minimal. That 85 A rating is the full-load current it can make and break under those conditions, not a motor-starting figure.
Mounts on a plate or DIN rail, which means it slots into a standard control-panel layout alongside other Easy TeSys or third-party gear. The 85 mm width and 127 mm height leave room for adjacent devices in a crowded enclosure.
Fire resistance rated to 850 °C per IEC 60695-2-1. The protective treatment is TH (pollution degree 3) per IEC 60068, meaning it handles typical factory-floor contamination without creeping discharge. Operates from -5 °C to 55 °C ambient and stores from -60 °C to 80 °C, with a 3000 m altitude limit — fine for most indoor industrial sites.