Skip to main content
Log in
Schneider Electric LC1E65008P7IN — Contactors

Schneider LC1E65008P7IN Easy TeSys Contactor, 4P, 85A AC-1,

MPNLC1E65008P7IN
Obsolete

Schneider Electric Easy TeSys Control, LC1E65008P7IN, 4P (2NO+2NC) contactor, AC-1 ≤415 V 85 A, 230 V coil.

Schneider Electric LC1E65008P7IN datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LC1E65008P7IN — Identification
ParameterValue
Product / component typeContactor
Series / rangeEasy TeSys
ApplicationResistive load
LC1E65008P7IN — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 10 MOhm for control circuit
Utilisation categoryAC-1
LC1E65008P7IN — Contacts & Poles
ParameterValue
Pole configuration4P
LC1E65008P7IN — Environmental
ParameterValue
IP degree of protectionIP2X conforming to IEC 60529
Operating altitude3000 m
Mechanical robustnessVibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor open (6 Gn for 11 ms) Shocks contactor closed (7 Gn for 11 ms)
Protective treatment / pollution degreeTH (pollution degree 3) conforming to IEC 60068
Fire resistance850 °C conforming to IEC 60695-2-1
LC1E65008P7IN — Approvals
ParameterValue
StandardsEN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5
LC1E65008P7IN — Mechanical
ParameterValue
Width85 mm
Height127 mm
Depth125 mm

Product details

The Schneider Electric LC1E65008P7IN is a 4-pole contactor from the Easy TeSys Control range, configured 2NO+2NC, rated 85 A in AC-1 utilisation category for resistive loads at up to 415 V with a 230 V coil. It is designed for switching resistive loads — heaters, ovens, lighting banks — where inrush current is minimal and the load current stays steady through the make-and-break cycle.

Built to EN/IEC 60947-1, EN/IEC 60947-4-1, and EN/IEC 60947-5-1, plus the Chinese equivalents GB/T 14048.1, GB/T 14048.4, and GB/T 14048.5.

Mounts on DIN rail or plate. Dimensions: 85 mm wide, 127 mm high, 125 mm deep — standard footprint for this frame size. Mechanical robustness: 1.5 Gn vibration open, 3 Gn closed, 6 Gn shock open, 7 Gn closed.

Frequently asked questions

What are the key ratings I need to confirm fit?

85 A in AC-1 utilisation category (resistive loads), 4 poles configured 2NO+2NC, coil voltage 230 V, maximum operating voltage 415 V. DIN rail or plate mount, 85×127×125 mm.

What standards does this contactor comply with?

EN/IEC 60947-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, GB/T 14048.1, GB/T 14048.4, GB/T 14048.5. Fire resistance 850 °C per IEC 60695-2-1. Protective treatment TH (pollution degree 3) per IEC 60068. IP2X per IEC 60529.

How do I source this obsolete part?

Submit an RFQ. We source verified new-old-stock and surplus through the independent channel. The critical check is confirming the 85 A AC-1 rating, 4P 2NO+2NC configuration, and 230 V coil match your application.

MPN
LC1E65008P7IN