The LC1E80004V7IN is a 4-pole (4NO) contactor from the Easy TeSys Control range, rated for 110 A in AC-1 utilisation category at up to 415 V. AC-1 covers resistive loads — heaters, lighting banks, non-inductive circuits — so this contactor is sized for switching those loads, not motor starting. The 400 V coil suits standard three-phase control voltages across 50/60 Hz panels. Mounting is flexible: plate or DIN rail. The 95 mm width and 127 mm height fit a standard contactor footprint on the rail, leaving room for auxiliary blocks alongside. IP2X finger protection is the minimum for enclosed gear — fine inside a panel, not for open washdown areas.
Rated operational voltage for the power circuit is given as 10 MOhm for the control circuit — that is the insulation resistance test value, not a working voltage. The contactor is built to EN/IEC 60947-4-1 and GB/T 14048.4, which cover contactors and motor-starters.