The Schneider Electric LC1E80008B7IN is a 4-pole (4 normally-open) contactor from the Easy TeSys Control range, rated for resistive loads in AC-1 utilisation category up to 415 V and 110 A. The 24 V 50/60 Hz coil makes it a direct fit for control transformers or 24 V control supplies common in panel designs.
The AC-1 rating at 110 A is the key number: this contactor is designed for resistive loads (heaters, lighting banks) where inrush is low. It is not rated for motor starting (AC-3) or inductive loads — using it on a motor circuit would exceed its switching capability and risk contact welding. The 4-pole NO configuration gives you four independent switching paths, each rated for the full 110 A in AC-1, so it can switch a three-phase resistive load plus a neutral or separate control circuit. Mechanical robustness is specified: the contactor withstands 1.5 Gn vibration when open and 3 Gn when closed, plus shock ratings of 6 Gn open and 7 Gn closed. That puts it in the range for industrial panels on factory floors with moderate vibration from nearby machinery or conveyors.
That covers the main industrial control gear standards for contactors and motor starters.